MrPKI's Coaster Tunnels
My first custom scenery set is here. This set is designed to help create compact tunnels especially for wooden and mine train coasters in RCT3. Although it is designed with these two coasters in mind, it will work with most other coaster types as well. Any piece labled "extended" or "outside" is a piece with placement extended outside the tile so as to prevent the wooden coaster rails from "bleeding" through the walls. All the pieces have countless different uses, some of which I'm sure I don't even know. So experiment away! ;-)
(A special note about curves)
To make a large wooden coaster curve, for example, to prevent bleeding you will need to use a "large outside curve" and a "small inside curve". To make a large curve for a mine train where preventing bleed isn't neccesary you would use a "large inside curve" and a "small outside curve" ect. And if you don't understand this, it's best to just to go experiment with the pieces. It's not too terribly hard, I promise. :-)
Note: If you downloaded v1, I cannot guarantee that all or any of your pieces will show up if you replace it with v1.1 It may work, but I can't promise it will.
Coaster Tunnels can be found in the Western scenery section in RCT3.
Create a free website at Webs.com